LANCP, LIST, NODE
*Conan The Librarian
Displays information in the LAN permanent node database,
especially MOP downline load information.
LIST NODE node-name
Specifies the node name. The name can include up to 63 characters
associated with the node address. If no node name is given, all
nodes are displayed.
2.1 - /ALL
Displays data for all nodes in the LAN permanent node database.
If you specify a node name, all matching nodes are selected; for
example, A/ALL selects all nodes beginning with A.
2.2 - /OUTPUT
Creates the specified file and directs output to that file. If
the file extension is .com, the output is in the form of a list
of DEFINE NODE or SET NODE commands. The resulting command file
can be used to create the LAN node databases.
LANCP> LIST NODE
MOP DLL: Load file: APB.EXE
Load root: $64$DIA24:<SYS11.>
Boot type: Alpha satellite
MOP DLL: Load file: NISCS_LOAD.EXE
Load root: LAVC$SYSDEVICE:<SYS10.>
Boot type: VAX satellite
MOP DLL: Load file: READ_ADDR.SYS
Last file: LAN$DLL:APB_X5WN.SYS
Boot type: Other
2 loads requested, 1 volunteered
1 succeeded, 0 failed
Last request was for a system image, in MOP V4 format
Last load initiated 30-OCT-1994 09:11:17
on EXA0 for 00:00:06.65
527665 bytes, 4161 packets, 0 transmit failures
Requests received 2
Requests volunteered 1
Successful loads 1
Failed loads 0
Packets sent 2080
Packets received 2081
Bytes sent 523481
Bytes received 4184
Last load CALPAL at 10-JUN-1998 09:11:17.29
This example shows output from a LIST NODE command issued on
a local node on which there are three nodes defined (GALAXY,
ZAPNOT, and CALPAL). CALPAL has issued two load requests:
o The first request is the multicast request from CALPAL that
the local node volunteered to accept.
o The second request is the load request sent directly to the
local node by CALPAL for the actual load data. The elapsed
time from the second load request to completion of the load
was 6.65 seconds.